Each seal kit includes:
- 2 Straight Lip Loaded U-seals
- 1 O-ring thread seal
CPO-3000 has a 3 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
| 1-29 | $14.39 |
| 30-59 | $10.29 |
| 60-119 | $7.99 |
| 120-287 | $7.19 |
| 288+ | $6.55 |
HT-6750X6000 has a wall thickness of 0.375 in. The ID is 6 in and the OD is 6.75 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $13.10 |
| 15-59 | $11.45 |
| 60-89 | $10.17 |
| 90+ | $9.16 |
Machined from 1018 Carbon Steel for a 6 in cylinder.
The length is 1 in and the lip is 0.375 in in tall.
Base plates are welded to the end of the cylinder opposite the rod end to secure the cylinder. They provide a solid support for the entire cylinder base area.