2.5 in induction hardened chrome shafting. The base material is 1045/1050 Carbon Steel with 0.0005 in (0.0127mm minimum)-thick chrome plating and a case depth of 0.05 in (1.27 mm).
Induction Hardened Chrome is typically used in abrasive envrionments where the cylinder is exposed to rocks or heavy debris. Also used to machine clevis pins.
- Greater strength
- Better resistance to mechanical damage
Packages longer than 44 inches may have additional freight charges.
| 1-29 | $11.12 |
| 30-74 | $7.95 |
| 75-134 | $6.17 |
| 135-287 | $5.56 |
| 288+ | $5.06 |
HT-6750X6000 has a wall thickness of 0.375 in. The ID is 6 in and the OD is 6.75 in. The material is DOM 1026 Carbon Steel and has been stress-relieved and annealed.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $13.10 |
| 15-59 | $11.45 |
| 60-89 | $10.17 |
| 90+ | $9.16 |
Cast Iron Rod Clevis Mount with a 2.25 in – 12 TPI threaded end and a 2.5 in pin hole.
Clevis mounts help maintain alignment and protect the cylinder from side load. Mounts attach to threaded stud ends, pivot holes, or bolt holes on the cylinder. Can be used with hydraulic cylinders with standard bore sizes.