SK, HG-30125A - SK-HG30125A | CRC Distribution Inc.

Each head gland seal kit includes:

  • D Wiper
  • Loaded U-Cup Rod Seal
  • O-ring
  • Backup Ring
$8.34
/EA

CPO-1250 has a 1.25 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.

ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.

  • Extremely smooth surface finish
  • Excellent wear and corrosion resistance
  • Good strength and impact properties
  • Good machinability
  • Reasonable weldability
  • Fair response to normal heat treating and induction hardening practices

Packages longer than 44 inches may have additional freight charges.

1-14$3.67
15-29$2.45
30-89$1.75
90-134$1.36
135+$1.22
/IN
at
Select Length
IN
-
IN

HT-3500X3000 has a wall thickness of 0.25 in. The ID is 3 in and the OD is 3.5 in. The material is DOM 1026 Steel – ST52.3 and has been stress-relieved and annealed.

Packages longer than 44 inches may have additional freight charges.

1-14$4.47
15-59$3.47
60-104$3.13
105-149$2.85
150+$2.61
/IN
at
Select Length
IN
-
IN

HC-3500-12 has a 4 in OD and is made to fit a 3 in bore cylinder.

Head cap size is determined based on the bending stress.

A static seal or o-ring is used in between the head cap and barrel (except welded construction).

The main function of the head cap is to enclose the pressure chamber at one end. The cap is connected to the cylinder body by means of welding, threading, bolts, or tie rod.

$69.93
/PC