HC-5500-12 has a 6.5 in OD and is made to fit a 5 in bore cylinder.
Head cap size is determined based on the bending stress.
A static seal or o-ring is used in between the head cap and barrel (except welded construction).
The main function of the head cap is to enclose the pressure chamber at one end. The cap is connected to the cylinder body by means of welding, threading, bolts, or tie rod.
CPO-2250 has a 2.25 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
- Extremely smooth surface finish
- Excellent wear and corrosion resistance
- Good strength and impact properties
- Good machinability
- Reasonable weldability
- Fair response to normal heat treating and induction hardening practices
Packages longer than 44 inches may have additional freight charges.
| 1-29 | $8.13 |
| 30-74 | $5.81 |
| 75-134 | $4.51 |
| 135-287 | $4.06 |
| 288+ | $3.70 |
PP-45175125D has been machined to fit a 4.5 in cylinder bore and has a 1.25 in rod hole. The piston length is 1.75 in.
Piston is designed for a Polypak seal.
Matching seal kit is available.
Ductile head gland made for a cylinder with a 2.5 in rod and 4.5 in bore. Machined in USA.
Threads are UN/UNR standard threads.
This head gland has a Wide. Both Regular and Wide bases are available.
Matching seal kit is available for purchase.
Ductile head gland made for a cylinder with a 3 in rod and 4.5 in bore. Machined in USA.
Threads are UN/UNR standard threads.
This head gland has a Wide. Both Regular and Wide bases are available.
Matching seal kit is available for purchase.