Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.
92A Durometer | Urethane Material | 8 in Nominal Inner Diameter
Features
- Used in Heavy Duty U-seals
- Capable of surviving hostile environments
- Molded from the high performance urethane
The Hallite 533 is capable of withstanding high side loads and preventing metal-to-metal contact between the piston and the bore or the rod and the gland.
The PA 533 material is heat stabilised 33% glass reinforced nylon 66, which offers excellent bearing properties.
Compatible with hydraulic and lubricating oils. The PA 533 material is not recommended for use in water based fluids (HFA) or where significant water is present, due to the swell of the nylon.
HT-14000X12000CDS has a wall thickness of 1 in. The ID is 12 in and the OD is 14 in. The material is CDSM 1026 Carbon Steel and has been stress-relieved and annealed.
This tube has been produced using the cold drawing process and is seamless. The cold drawing process produces higher physical properties without additional heat treating resulting in good strength to weight ratios.
Packages longer than 44 inches may have additional freight charges.
| 1-14 | $88.80 |
| 15-59 | $72.80 |
| 60+ | $66.80 |