CPO-2000 has a 2 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
Packages longer than 44 inches may have additional freight charges.
1-29 | $6.40 |
30-74 | $4.58 |
75-134 | $3.55 |
135-287 | $3.20 |
288+ | $2.91 |
CPO-2250 has a 2.25 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
Packages longer than 44 inches may have additional freight charges.
1-29 | $8.13 |
30-74 | $5.81 |
75-134 | $4.51 |
135-287 | $4.06 |
288+ | $3.70 |
CPO-2375 has a 2.375 in diameter with Standard Chrome. The base material is 1045 Carbon Steel with a yield strength of 75,000 psi.
ASTM A108 is the most commonly used and economical grade of shafting for hydraulic cylinder components, blower shafts, and mandrels.
Packages longer than 44 inches may have additional freight charges.
1-29 | $7.21 |
30-104 | $5.59 |
105-287 | $5.04 |
288+ | $4.59 |
TR-625 has a 0.625 in diameter. The material is 1144 Carbon Steel, which is equivalent to Stressproof tie rod.
Tie rods are sold in 12 ft. lengths only. Rods can be cut for UPS shipment or left whole, if necessary. Freight charges may vary depending on required length.
Packages longer than 44 inches may have additional freight charges.