Snap-in Wipers for Sale | CRC Distribution

RW-90URE-25×33×5

RW-90URE-35×43×5

Light duty, polyurethane wiper with a double-stepped shoulder to fit tightly into the gland throat.

• Double-stepped shoulder

Light duty, polyurethane wiper with a double-stepped shoulder to fit tightly into the gland throat.

• Double-stepped shoulder

RW-90URE-35.00×43.00×5.00/6.50

RW-93URE-20.00×26.00×3.80 (4.00)

The Hallite 38 single-lipped polyester wiper/scraper is designed to fit metric housings including those of ISO 6195A. Suitable for heavy duty applications.

The proportions of the wiping lip ensure that contact is maintained with the surface of the rod to remove heavily deposited containments such as mud and ice.

The outside diameter of the wiper incorporates a crush lip to provide an interference fit with the housing. This feature helps prevent contamination from entering the groove.

The Hallite 38 wiper is molded in a polyester-based material to provide a tough, abrasionresistant wiper for the difficult conditions usually found in mining or earth moving applications.

• Crush lip design provides effective seal on housing
• Ribs relieve pressure and improve stability
• Effective scraping lip to scrape off heavily deposited containments including ice

RW-94URE-38.00×46.00×3.60

Light duty, polyurethane wiper with a double-stepped shoulder to fit tightly into the gland throat.

• Double-stepped shoulder

RS/RW-URE-20×30×10.4